Manual Feeding Tube Filling Machine

  • The ultrasonic welding unit is 1400 Watt / 20 kHz.
  • The product filling section of the machine is manufactured from 316 quality stainless steel.
  • Production tube to be min. 19 mm max. diameter 50 mm.
  • The volume of the filling unit is max.300ml.
  • The machine can be adjusted according to the size and diameter of the tubes to be filled.
  • The filling capacity of the machine is 30-36 min / piece.
  • The filling unit works with volume filling logic and the filling nozzle unit is pneumatically closed.
  • Since there is no heat in the ultrasonic weld bonding system, the bonding time is adjusted on the operator panel according to the tube diameters, and the settings are registered as a recipe on the screen.
  • The machine has 10 inch touch '' touch screen '' control panel and '' PLC '' control.
  • Machine, PLC and operator panel can be interfaced via internet and send program. The PC panel has Windows based processing system.
  • Product turning control sensor BANNER brand sensor is used.
  • Product point presentation can be done easily via the operator panel.
  • Pneumatic pistonsensors are SICK brand.
  • The machine features pneumatically cutting the remaining weld marks and welding excess after ultrasonic bonding. It is aesthetically pleasing to the eye.
  • The pneumatic test unit used in the machine and the non-adherent tubing have the property of separating as faulty products.
  • The test unit provides you with controlled and quality production.
  • The test unit prevents you from shrinking during production.
  • The test unit provides you with the desired strength and quality production.
  • The turntable has 10 stations and the product is secure against compression and operator jam.
  • Precise planetary reducer and servo motor are used in the turntable.
  • Since tube molds have special design according to variable diameter and paint, you do not need to adjust the height of the machine with respect to the product change. The special design mold prevents the loss of time at the first setting of the machine and it gives you time to enter the production in a very short time.
  • Dimensions a: 175 cm, b: 260 cm, h: 220 cm.
  • Weight 850kg.
  • 220 Volt 6 atm.
  • Automatic feeding unit
  • Thermostatic funnel heat setting and thermostat
  • Specially designed cabin
  • Numerical pattern (date and lot stamped figures)
  • Mixer Mixer
  • Nitrogen Filling Unit